Water Treatment Solutions and Facility Maintenance Chemicals for Chemical Manufacturers

Utility-side chemistry, mostly: boiler and cooling water treatment, closed loop treatment, descaling on heat transfer equipment, cleaners and degreasers for equipment and plant, defoamers for process and effluent water, and sanitation chemistry. Plants that formulate their own products still rarely make their own utility chemistry.

Because it is a specialty in its own right and it is not what the plant’s chemists are set up to do. Boiler and cooling water treatment needs field testing, trending and equipment knowledge more than it needs formulation capability, and a plant that treats its own utilities usually finds the monitoring is what lapses.

Everything reactive. Any product coming on site has to be assessed against what it might contact in a spill, a shared drain, a shared containment or a cleaning operation. We will provide the full compatibility information for anything you are considering, and we expect to be asked.

Cleaning validation. Establish what residue level is acceptable for the next product, choose chemistry that removes the specific residue, and verify rather than assume. Changeover cleaning that is validated once and then run by habit is where most cross-contamination findings originate.

Surfactants, proteins, high solids or entrained gas depending on the stream. In effluent, foam reduces basin capacity and trips level instruments. The control is a defoamer matched to the specific foam at the lowest effective dose, because overdosing can stabilise foam rather than break it.

Clean on condition rather than schedule, using differential pressure or approach temperature trended from a clean baseline. Identify the deposit before selecting chemistry, because a mineral scale, an organic polymer and an iron deposit each need a different approach and a wrong guess costs a whole outage.

Full product composition information appropriate to your assessment, safety data sheets, compatibility information, and the technical data behind any application recommendation. Bringing a new chemical into a chemical plant is a formal process and we expect to supply what it requires.

That is a fair question to ask any supplier, and the answer is in the record rather than the promise. We manufacture our own chemistry in Sturgeon County, Alberta and Kissimmee, Florida rather than reselling, which removes a layer between your order and the production decision.

Yes, and both conversations matter. Procurement needs supply terms, documentation and reliability. The technical group needs the application detail and the compatibility data. Our representatives are used to running both rather than only the commercial one.